Seven points for reasonable storage of small road rollers in autumn

September 22, 2021

Small road rollers are widely used in filling compaction operations of high-grade highways, railways, airport runways, dams, stadiums and other large projects The layer is deformed and dense. Road rollers are divided into three types: single steel wheel type, double steel wheel type and tire type. For customers who purchase road rollers, the storage of road rollers is more important than anything else, so how should the road roller be stored?

1. Maintenance and management of storage batteries:

1) The battery should be removed and placed in a dry and warm place. To keep the surface clean and dry, do not place conductive objects on the battery. When removing the battery, first cut off the negative wire and then the positive wire; when installing, connect the positive wire first, and then the negative wire. Because the electrical system of the vibratory roller is a negative ground, this is to prevent a short circuit when disassembling the battery.

2) Rollers started with lead-acid batteries should be charged once a month.

2. Engine maintenance and management:Diesel Engine Injection Pump,Hydraulic Solenoid Valve,Cylinder Liner Set,Engine Crank Shaft etc ,will excellent quality and reasonable price .

1) Drain the cooling water in the engine.

2) Change the engine oil. New engine oil is usually neutral and will not corrode the metal parts of the engine.

3) Fill the fuel tank with diesel to avoid rusting of the fuel tank. If conditions permit, preservatives should also be added.

4) During the shutdown period, the engine should be started once a month to allow the machine to travel a short distance so that a new oil film is established at the lubrication of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling water should be drained at the end.

3. Anti-rust treatment:

1) Before storage, determine whether to use touch-up method or the method of re-painting the whole machine according to the size of the peeling area of the outer surface of the anti-corrosion paint.

2) For the working device of the vibratory roller, the anti-rust method for the exposed metal part is to apply butter.

4. It should be parked in a dry room. Those who have to stop outdoors should choose a flat ground and cover them with wooden boards. Cover it with a drape after parking.we will also update the smaller excavators diggers maintance Smaller Excavators Diggers.

5. Before long-term storage, the machine must be maintained, repaired and damaged, and cleaned up thoroughly to maintain a good technical condition.

6. The arrangement and layout of the parking lot should ensure that the entry and exit of any machine is not affected by other machines.

7. The fuel control lever of the machine should be placed in the idle position, and the control levers should be placed in the neutral position.Hydraulic Main Pump,Komatsu Travel Motor,Excavator Travel Motor

1 5tons Road Roller Ocr15 3 Jpg 1 5tons Road Roller Ocr15 4 Jpg